Skip navigation

What connecting to the heat network means for your privately owned home

Are you considering connecting to the heat network, but not yet sure exactly how it works? As the owner of your home, it is up to you whether you want to take part. On this page, you can find out how the switch works, who helps you along the way and what will change in your home.

Making the switch together

If you own a home, the team at Grunneger Power will guide you through the process. They will contact you, also on behalf of the municipality of Groningen and WarmteStad. They are your point of contact throughout the entire process.

The Grunneger Power team will help you choose what works best for your situation. They will answer your questions and explain what you need to do to switch to the heat network. They will also tell you about the work involved, the costs and any subsidies you may be able to get.

You decide whether you want to connect your home to the heat network. Grunneger Power gives you all the information you need to make your choice. This way, you know what to expect and have someone to turn to if you need help. 

What changes in your home

When your home is connected to the heat network, the way you heat your home changes too. The gas connection and the central heating boiler are removed from your home. Two heat pipes are installed in your home: one to bring heat in and one to carry water back. You also get a heat interface unit. This replaces your boiler and is often put in the same place. 

The amount of work needed depends on your home. Once the work is done, we leave your home neat and tidy. We replace your boiler with the heat interface unit in one go. This means your home can be heated again quickly. 

The costs

You pay a personal contribution to connect your home to the heat network. This covers the connection from the street to the heat interface unit in your home. The exact amount has not yet been determined. A large part of the costs will be covered by subsidies. First, we need to know which subsidies are available.

Curious about your monthly costs? Use WarmteStad's calculation tool at warmtestad.nl/rekentool.

The process

1. Getting acquainted
Grunneger Power invites you to a meeting for local residents and a personal visit to your home. During the visit, they explain what connecting to the heat network means for you. You can also ask any questions you have.

2. Looking at your home
Together, you look at the type of home you have and the best way to connect it to the heat network. We want to make sure you have all the information you need.

3. Costs and subsidies
Grunneger Power tells you about possible subsidies and any personal contribution you may need to pay. They can also help you apply for subsidies. 

4. Your choice
After that, you decide whether you want to connect your home to the heat network. The choice is yours. 

5. Preparation and installation
When enough residents in the street or neighbourhood want to take part, we draw up an implementation plan. An installer will contact you to agree on when the work will take place.

6. Connecting your home
The central heating boiler is removed and replaced by a heat interface unit. Your home is then connected to the heat network and heated using heat from the network. If you currently cook on gas, you will need to switch to an electric hob to make your home fully gas-free.

The heat network may not be available in your neighbourhood yet. If not, it needs to be built first. We usually make an offer when the network is already there or will be built soon. 

Frequently asked questions

Yes, you are free to choose a connection to the heat network. It is good to know, however, that the gas connection will disappear in the future. You can choose to stop using natural gas in another way yourself, for example with a hybrid heat pump. You pay the costs of that yourself.

A hybrid heat pump runs on electricity and is connected to your central heating boiler. The heat pump's outdoor unit extracts heat from the outside air to heat your home. The boiler steps in when needed, for example on cold winter days, and also provides hot water. This means natural gas is still needed. A hybrid heat pump works best in well-insulated homes.

A heat network uses heat from sources such as residual heat and solar heat. For many homes, fewer modifications are needed to connect to a heat network. A hybrid heat pump also requires an outdoor unit and additional installations in or around the home. A connection to the heat network uses a heat interface unit inside the home.

If you currently have an old boiler that is due for replacement, you could consider renting a boiler instead of buying a new one. This saves you high costs, because once your home is connected to the heat network you no longer need a boiler. What's more, many providers will remove your rented boiler free of charge as soon as you are connected to the heat network.

The heat interface unit is very economical. A little electricity is needed for metering and for the unit to work properly. The unit is also whisper-quiet. You may occasionally hear water flowing through the pipe.

Central heating boiler
The boiler is replaced by a heat interface unit. Two pipes are fitted to the unit: one for hot water coming in and one for cooled water flowing back.

Modifications to your home (possibly)
Sometimes modifications are needed in your home, such as replacing your radiators. Together with you, we look at what is needed.

Electric cooking
If you still cook on gas, you need to switch to electric cooking, for example induction. Sometimes this requires an extra circuit or an upgrade of the meter cupboard. Often one extra circuit is enough.

Gas meter
As the final step, the grid operator removes the gas meter from the meter cupboard.

You will soon pay a monthly advance for the heat you use, just as you are used to with gas. With that advance you pay for the fixed costs and the expected usage costs. The fixed costs consist of 1) the fixed supply charge and 2) the rental of the heat meter and the heat interface unit. The usage costs depend on how much you use. With a heat network you pay per gigajoule (GJ) of heat you take, just as you now pay per cubic metre (m3) of natural gas.

Heat tariffs
You can find the current price of heat at warmtestad.nl/warmtetarieven. Your price is fixed up to and including 31 December. This gives you the certainty of paying one fixed price all year. The price cannot go up if energy becomes more expensive. This is similar to a one-year contract for gas. Does the gas price rise during the year? Then heat often works out even cheaper for you.

The price of heat from the heat network is never higher than the gas price. In fact, the prices are always below the maximum tariff set by the Netherlands Authority for Consumers and Markets (ACM). This is thanks to the annual agreements with the municipality and the housing associations. That is how we ensure a price that is as fair as possible.

Do a trial calculation
Do you have a home with two or more rooms? Use warmtestad.nl/rekentool to convert your current annual gas consumption into heat on our public heat network. This gives you immediate insight into your personal situation.

View all frequently asked questions